SAB CHANNEL BANK SWITCHING
The following is the
switching chart for accessing the extra memory banks on the Syntor. If you have
modified your SAB as described here, it will default to Bank 1, in case you don’t
plug the BCD switch in.
After you have carefully checked your wiring
and soldering for errors or fugitive solder bridges, we recommend that you
generate a test frequency file to test the wiring and switch connections.
Create a file with
16 banks, and put a single frequency in each bank
Program the test
file into an eprom, put it in the SAB and use a frequency counter or scanner to
verify the bank switching is correct. Depending
on the switch you have chosen, the banks may be in reverse order.